LED Indicators
LED Status Condition
ALARM (red)  Normal condition
System in alarm and all alarms have been acknowledged
An alarm condition exists and has not been acknowledged
SUPERVISORY (yellow) Normal condition
Supervisory condition exists on the system
Supervisory condition exists on the system and has not been acknowledged
TROUBLE (yellow) Normal condition
Trouble condition exists on the system
Trouble condition exists on the system and has not been acknowledged
SILENCED (yellow) Normal condition
Alarm or trouble condition has been silenced but condition still exists
AC (green) Panel is running on AC (normal condition) and the backup battery is fully charged
Panel has lost all power
Panel is running on AC power only or backup battery power only

 

Test System
Buttons to Press Display Message Enter through Keypad Comments
System Test
Enter Code

access code

The system will perform a display lamp test and a communication test

 

Reset Alarms
Buttons to Press Display Message Enter through Keypad Comments
Reset Alarm
Enter Code

access code

Resets system

 

Clear History
Buttons to Press Display Message Enter through Keypad Comments
Clear History
Enter Code

installer code

Clears event history of all events

 

Reset the Dialer
Buttons to Press Display Message Enter through Keypad Comments
Reset Dialer
Enter Code

installer code

Resets the dialer and aborts the report to the monitoring station

 

Call Computer to Up/ Download
Buttons to Press Display Message Enter through Keypad Comments
Call Computer
Enter Code

installer code

Will dial the programmed phone number for the computer to initiate an up or download

 

Display History Events
Buttons to Press Display Message Enter through Keypad Comments
History Events
Enter Code

installer code

Displays the system history, which includes alarms, supervisories, troubles, reports, time and date changes, etc

 

Show Status
Buttons to Press Display Message Enter through Keypad Comments
Show Status
Enter Code

access code

View existing system status. List alarms first, supervisories, and then troubles.

 

Silence Troubles or Alarms
Buttons to Press Display Message Enter through Keypad Comments

or
Silence
Enter Code

access code

 

 

Set Date
Buttons to Press Display Message Enter through Keypad Comments
Set Date
Enter Code

access code

Enter 8 digits for the date. Example: for 08/31/1999, enter 08311999. Press to clear incorrect entry.

 

Set Time
Buttons to Press Display Message Enter through Keypad Comments
Set Time
Enter Code

access code

Enter the time in 24 hour format. Example: 2pm is entered as 1400.

 

Disable/Enable Zone
Buttons to Press Display Message Enter through Keypad Comments
 Zone number

and
Disable Zone
Enter Code

access code

Repeat the process to enable the re-enable the zone

 

Fire Drill
Buttons to Press Display Message Enter through Keypad Comments
 
Fire Drill
Enter Code

access code

To end the Fire Drill, press then access code

 

Reset Detectors
Buttons to Press Display Message Enter through Keypad Comments
Rst Smk Pwr
Enter Code

access code

Resets all smoke detector power

 

Walk Test
Buttons to Press Display Message Enter through Keypad Comments
Walk Test
Enter Code

installer code

To end the Walk Test press

 

Menu of Options
Buttons to Press Display Message Enter through Keypad Comments
 

or

  

installer code

To exit press or wait 15 seconds